On a rising tide, the remaining brown shrimp and growing white shrimp that fuel the Louisiana marsh ecosystem are scattered throughout the skinny-water marsh ponds, enjoying the hours of relative peace and quiet that accompany high water levels. To be sure, some get picked off by marauding hordes of redfish that scavenge around every grass bed, searching for any living morsel that might provide an appetizer before the entree really arrives.

That happens when the tide turns. As water levels begin to fall, tides stack the hapless shrimp on the conveyor belt of death, dragging them from back waters to the bigger lakes and bays. Redfish know this, of course, so they camp out at marsh drains, and let the food come to them. This puts the fish in an aggressive, feeding frame of mind, and makes them particularly susceptible to lures you’d find in the tackle box of a guy hoping to win the Bassmaster Classic.

One of my favorites is a Bill Lewis Echo 1.75 crankbait, a lure that’s obnoxiously loud and has more action than a salsa dancer. That’s what I had tied on during a trip in July that began just three hours before the sun would cross the western horizon. I intentionally started late, partially to avoid the suffocating heat but mostly because that’s when the tide was falling. While working the shoreline of a large marsh lake, I came upon a drain that was dumping gorgeous water from a pond choked with hydrilla and coontail. It certainly looked like a place that might hold a feeding redfish or two.

Not all my casts are perfect, but this one was, landing just at the opening of the drain. I wouldn’t have to wait long to see if any feeding reds were there. I don’t think I got two full cranks on the reel before something clobbered the hard-plastic bait and I instinctively set the hook. The water erupted in a froth of copper-tinted foam as a 27-inch redfish became enraged at the baitfish that seemed to have otherworldly power. The fish thrashed its head back and forth, and in the process managed to dislodge the hooks from its gaping maw.

The lure flew through the air, reentering the water about 5 feet away. I was disappointed at having lost the fish but, as always, impressed by the power and tenacity of these trophic marsh dwellers. Then something crazy happened. Apparently super annoyed that its easy meal had gotten away without providing a little corner of contentment in its belly, the redfish charged at the bait and absolutely obliterated it while it was resting motionless on the surface. I again set the hook, and this time, the fish wouldn’t get so lucky. It would never again get to swim where it wanted without a yellow tag near its dorsal fin.

Would the ubiquitous soft-plastic paddletail have elicited the same reaction from this redfish? Who knows? But it’s not for novelty that my favorite redfish lures this time of year would work equally well on a cypress-peppered flat of an impoundment. Redfish just can’t seem to resist them.

In addition to the crankbaits, I also regularly throw a gold-bladed spinnerbait teamed with a ¹⁄₄-ounce jighead and soft-plastic paddletail as well as a ribbed worm fished Texas-rigged below a ¹⁄₄-ounce tungsten bullet weight. The crankbait is my go-to in waters devoid of submerged aquatic vegetation or where there’s a hard edge to the grass that the fish use as a shoreline. When the grass is scattered, I’m more likely to reach for the spinnerbait, and in areas with drop-offs and ledges, the worm is hard to beat.

All are proving particularly effective this year. After a few meager seasons, the spawn of 2021 was especially robust, and those fish are all now in the 18- to 22-inch range. The marshes are absolutely crawling with redfish.

The post Bass Fishing for Redfish appeared first on Sport Fishing Mag.

Mullet

King of the inshore baitfish, different mullet species are a favorite food for everything from striped bass to tarpon. Mullet connoisseurs prefer individuals that feed over sandy bottom for the finest bait. Apparently, they taste better to gamefish (and even anglers).

Mud Minnows (aka Mummichog)

The hardy little killifish is a great bait for flounder, redfish and speckled trout. Easy to catch in a small mesh trap, the minnows will stay alive for hours in the bottom of a cardboard box covered with a blanket of wet newspaper.

Herring

These come in different varieties. It could be threadfin herring in Florida. Or maybe it’s blueback herring or shad species farther north. No matter where you fish, herring are a likely baitfish worth using or imitating. Some herring species travel into fresh waters, making them great options for heavyweight catfishing too.

Atlantic Menhaden

They have been called the most important inshore fish as an essential part of the food chain and a powerful water filter. Menhaden start their life in the marsh where they feed the next generation of gamefish. Too small to use as live bait, the small, silver menhaden are imitated by dozens of twitch baits, soft plastics and swimming plugs.

Scaled Sardines (aka Pilchards or Greenbacks)

Sardines school up into living clouds of little fish providing a reliable source of food for all types of inshore gamefish. Whether used live, frozen or imitated with all sorts of lures, greenies are a best bet. Scaled sardines are known to spawn offshore and are especially popular on the Southwest coast of Florida.

The post Five Baitfish Species You’ll Find in the Marsh appeared first on Sport Fishing Mag.

In the prestige column, where largemouth bass rate a 10, bowfin come up snake eyes. But those who know and appreciate bowfin will tell you when it comes to rating these species’ fight, the bowfin should come out well on top. Very few native North American game fish will outfight the bowfin. Other names for bowfin include choupique (Louisiana), grindle, mudfish or dogfish.

Notice the descriptor “native.” No one can suggest the bowfin is introduced or invasive; in fact, they’re one of the most indigenous of our fishes, found only in (eastern) North America. And this living fossil has been around longer than most species of fish — since the Triassic era, 150 to 200 million years back. It’s the only living member of the order Amiiformes, other species extinct. Clearly, the bowfin is a survivor.

Bowfin are Tough-Fighting Fish

It’s also an irascible brute. After catching many bowfin, I’ve learned to be cautious when trying to unhook one, whether boat side or in the boat. One might suppose these fish wear themselves out with their take-no-prisoners response to being hooked: They make unstoppable runs, sudden turns and come flying out of the water in wild leaps. They just don’t give up. Yeah, bowfin really do make bass seem pretty tame.

If, after all that, you can get them to boat, watch out. Bowfin launch into what anglers have termed a death spiral: they spin unstoppably, with great force, twisting and wrapping themselves in line and leader, and often making it nearly impossible to zero in on the hook in their jaw with pliers.

Where to Catch Bowfin

Often in warm weather, shallow, weedy waters without much current become increasingly hypoxic, as oxygen is used up. Thus most game fish species move out to deeper, less oxygen-deprived habitat. But one predator can remain: the bowfin. That’s because this ancient species is a bimodal breather, retaining its ability to breathe air, which it does by gulping in air at the surface which it can store in its swim bladder from which small blood vessels can take in the oxygen as if from a lung.

This explains their tendency to gulp at the surface or roll in very shallow waters. Anglers may sight-cast to these fish, but success at that can be tricky. That’s because bowfin are decidedly not visual feeders. These patient ambush hunters sit motionless over or in weeds until prey — or a lure or chunk of bait — moves essentially right in front of them. That’s the challenge for the angler. Bowfin will hammer any moving lure as a rule if they see it, so an angler has to get his retrieve right past its nose. Then, hang on! Their no-nonsense strike can rip the rod out of unprepared hands.

Fishing for Bowfin

Fortunately, the odds of being able to get close enough to drop your offering into their zone are increased because these things are not spooky. I’ve had them swim away if alarmed but not far at all, then stopping to offer more shots. They can be wary, however, and a boat may inhibit them from striking.

Sight-casting to bowfin is action at its most exciting, when fishing waters clear enough to spot them. Often, enthusiasts like Florida angler Paul MacInnis say that clear conditions and sunlight are important, since, “They don’t tend to push wakes or tail when feeding to reveal themselves. But when I can get a lure in front of one, I like to give it just a twitch or two — just enough to catch the bowfin’s attention. They’re aggressive and will usually pounce on it.”

But mostly, anglers drifting over shallow, weedy waters with low visibility, probably drift right past the big ones. That’s when fishing live or cut bait gets results. Apparently, what bowfin lack in the way of visual acuity, they compensate for with a keen sense of smell and the ability to detect vibrations.

Bowfins are Not Snakeheads

Until recently, one could maintain that bowfin couldn’t be confused with any other North American fish found in the same waters. The invasion of Asian snakeheads in much of the United States has changed that, since the two species share a similar elongate shape and distinctive characteristics such a large rounded tail and a dorsal fin that runs more than two-thirds of the body length. Those familiar with both species easily distinguish them since the snakehead’s head is more streamline like a snake, whereas the bowfin’s is more rounded. Lastly, the snakehead has a very long anal fin, while the bowfin’s is quite short.

Of course a major difference is that bowfin are native sons. While some anglers mistakenly accuse them of “eating all the bass” and other gamefish, they’re not any kind of a threat to the ecological balance of waters in which they live. Unwanted bowfin should be released alive. On the other hand, snakehead are considered an invasive species, and many states still ask anglers to kill them if caught.

The post The Underrated Bowfin appeared first on Sport Fishing Mag.

Some of the most productive areas you can fish appear as green blobs on coastal charts. While these areas are exposed to the atmosphere at low tide, they harbor plenty of fish when covered in water. Follow these tips to ensure you don’t damage the delicate marsh environment and end up on The Qualified Captain.

Learn the Waters

To effectively create a mental map of the marsh you intended to fish, you need to visit it at varying stages of the tide. I spend a fair amount of timed trudging through tidal mud at low tide looking for clams, so I know all of my local creeks intimately. If you don’t do this, I suggest at least anchoring the boat and walking the creek banks at dead low.

Proceed With Caution

Once you have a rough idea of where you can motor, do so at idle speed. You’ll want to probe likely areas for fish of course, but you’ll also want to poke around with an eye on the depth finder. Of course, a trolling motor excels here, so use it if you have it. If not, keep your motor tilted up a bit and look for a telltale plume of mud behind you.

Drop Some Breadcrumbs

Though these areas will show up as land on your plotter, you can still leave waypoints, or even better, a trail for you to follow. This will be your roadmap for future visits, but remember it is subject to change—a little bit of silt or an errant crab trap can ruin your day.

The post Tips for Boating in Shallow Water appeared first on Sport Fishing Mag.

The ultimate goal of Elon Musk’s SpaceX is to one day establish a colony of humans on Mars, a planet 140 million miles away. Reaching the Chandeleur Islands is only slightly easier. Formed more than two millennia ago when the Mississippi River was dumping sediment into its St. Bernard lobe, the Chandeleur chain is a 60-mile stretch of sand, shell, mangrove and dune grasses. It more resembles an unexplored moonscape than a popular fishing destination.

That’s partly because the area was included in the Breton Island Reservation by President Theodore Roosevelt more than a century ago, and development of any kind — even primitive camping — is illegal there. But it’s also because the Chandeleur chain is so freaking far from absolutely anywhere. Though it’s part of Louisiana, the nearest ports are actually in Mississippi. Still, it’s a 30-mile run over open water from Gulfport.

Boats that can handle those big offshore swells may not be best for exploring the shallow-water grass flats that seem to go on forever behind the protection of the islands. That’s why for many anglers, the best way to fish the islands is to plunk down a wad of cash, hop aboard a mother ship and fan out over the flats on skiffs with tiller-controlled outboards. A number of outfits along the Mississippi coast offer the service.

A DIY Chandeleur Island Fishing Trip

Other anglers with more of a DIY mindset wait for days with perfect conditions, load up on fuel and roar across Breton Sound in their bay boats. That’s what outdoor television-show host Kevin Ford and I did with our good buddy Capt. Justin Bowles during a June trip not too long ago. We had a night reserved at the Chandeleur Islander, a jack-up barge that provides hot meals and bunks for visiting anglers, so our plan was to scout on day one while fishing from the boat, in hopes of locating an area to wade-fish the morning of day two.

Most fishing plans, of course, require some adjustment on the fly, but this one worked to pure perfection. We launched along the Mississippi coast, and after a ride out that was a little bumpier than ideal, we arrived at the Chandeleurs mid-morning. Even though all of us are jaded lifelong anglers, we still stood in marvel at the sight of gin-clear water over seagrass flats as far as the eye could see.

We employed a hit-and-run strategy, fishing for a few minutes in a number of different areas, looking for the right mix of water clarity, depth and bait. Though we caught tons of fish from the boat, it was mostly a scouting mission to locate an area that would give us a reasonable chance of success while wading the next morning.

Great Fishing at the Chandeleur Islands

Lucky for us, it was an embarrassment of riches, with almost too many options to choose from. We all agreed on what we figured would be the No. 1 spot, and then spent the waning minutes of the day catching speckled trout within sight of the Islander. The next morning started well before dawn with way too much breakfast and that nervous chatter that always precedes fishing trips in new areas. We loaded our gear, and with only a hint of twilight to the east, we scooted down to the area we had found the day before.

With Bowles’ bay boat securely anchored, we fanned out over the grass flat, while a constant cacophony of nesting-shorebird calls washed across the flat surface. Before I even made a cast, I knew this was going to be one of the best fishing trips of my life. Everywhere around us, speckled trout were crashing into schools of mullet, emitting that characteristic pop sound big trout make when they suck in bait, water and air.

The fish clearly couldn’t tell the difference between our topwater plugs and the real thing. The explosions were relentless, and we all caught speckled trout almost every cast for the next three hours. It was epic.

But really, for the Chandeleur chain, it was just ordinary. The area is so vast, unspoiled and underfished, trips there that rank as the best of your life are the rule rather than the exception. Plant your toes in the sand at the right spot, and you simply won’t be able to believe how many fish can crowd into one area. I’ll be back out there soon — assuming Uncle Elon doesn’t come through with that ticket to Mars.

The post Wade Fishing the Chandeleur Islands appeared first on Sport Fishing Mag.

While a common mantra for catching flounder — “fish near the bottom, stupid” — is mostly true, being tuned in to exceptions and nuances increases the odds of bagging big flatties.

No one’s better at doing just that than top flounder fishing guides and pros. Questions we asked included what are the best flounder rigs, what’s the best bait for flounder, where can we catch flounder, and when is the best time to catch them. Here’s what the 10 experts said.

Catching Flounder in Maine

• Expert: Barry Gibson
• Region: Booth Bay Harbor, Maine
• Species: Winter flounder (known as “blackbacks” locally)

The late Barry Gibson spent decades targeting winter flounder. In fact, it was easy to spot his 28-foot Whitewater during the hot flounder months of July through September. “Area tides don’t make a lot of difference,” said Gibson. “Flounder like moving water around coves, estuaries and inlets that present fairly deep centers and shallow fringes. A sand or gravel bottom is ideal, but they’ll also feed over mud and grassy areas as well as mussel beds and creeks that empty into deeper water.

Maine Flounder Fishing Tips

• Go Zobo: Fish a Zobo rig developed by Pete Santini, a tackle-shop owner in Everett, Massachusetts. It’s essentially a high-low rig with hooks and 2- or 3-ounce sinkers painted orange or yellow for more visual appeal.
• Seduce with Sandworms: The best bait for flounder is a 3-inch section of a live sandworm. To make the worms less slippery, put them in a plastic container half filled with corn meal.
• Move It: Blackbacks feed more by sight than scent; try moving the bait a few inches at a time.

Catching Flounder in Massachusetts

• Expert: Capt. Jason Colby
• Region: Boston Harbor and Quincy Bay
• Species: Winter flounder

Catches of winter flounder weighing 3 pounds or more often reward anglers fishing with Capt. Jason Colby. You can find him aboard his 31-foot Contender with dual 300-hp Yamahas. He says the best months for winter flounder are May, June and July, and August to September for summer flounder, aka fluke. (Colby says summer flounder are encountered more often during August and September past Cape Cod.) Colby prefers no wind, but a light breeze with the tide works fine. “Generally, I drift over smooth bottom and anchor where there’s structure,” he says.

Massachusetts Flounder Fishing Tips

• Drop Down: Flounder tend to gather on the deeper side of a ledge, especially on a falling tide, around creek mouths that feed into larger bodies of water. Sometimes flounder follow baits to an anchored boat, so periodically drop straight down.
• A Puff of Mud: When chumming in a current over mud or sand, bounce your flounder rig on the bottom: Lift it 2 inches, and drop it suddenly. That creates a particulate puff each time the sinker hits, and blackbacks hustle over.
• Clam Up: Colby’s consistent success often relies on a two-hook tandem rig with one leader a little longer than the other. Put a clam on the shorter hook and a worm on the longer one — more flounder will go for the worm, but the clam is likely to attract the big boys.

Catching Flounder in New Jersey

• Expert: Capt. Scott Newhall
• Region: Southern New Jersey
• Species: Summer flounder

“Summer flounder start arriving around the coast in this area in April and during all of May,” says Capt. Scott Newhall. “Then they head into the back bay before reaching the continental shelf for the winter.” A veteran in the guiding biz, Newhall fishes a 21-foot Contender. “In the back bay, you want two hours before and after high tide, since you often get cleaner water then,” Newhall says. “Light winds add to the bite, and I run a drift speed of half to 1 mile per hour.”

New Jersey Flounder Fishing Tips

• Gulp! Over Gulp!: Go with a single-hook ­bucktail tipped with a Berkley Gulp!. Ten inches above that, thread a bare Gulp! onto a hook — all colors seem to work well. Vary the retrieve from a long stroke to rapid fire.
• Lots of Live Baits: Effective live baits include minnows, peanut menhaden (pogies or bunker), baby bluefish, striped killifish or mullet, fished on a bare hook.
• Structure on Sand: For ocean fishing, stay tight to structure where the debris or metal meets the sand. If you get a bite and the flounder drops the bait, immediately set it back.

Catching Flounder in North Carolina

• Expert: Capt. Jeff Onley
• Region: Albemarle Sound
• Species: Southern and summer flounder

Capt. Jeff Onley, who guides from a deep-V Polar Kraft, says the best flounder months in his neck of the woods are May to September, when winds come from the southwest to clear up water and push tides higher. “I prefer braided 6-pound line, up to 12-pound around structure when bigger flounder or stripers are in the mix,” says Onley.

North Carolina Flounder Fishing Tips

• Deploy a Dropper: A dropper rig using a rounded weight and, above it, a hook tied to the line or leader, helps avoid break-offs around structure.
• Best Baits and Lures for Flounder: The best live baits for flounder are croaker or mullet. For strip baits, he likes bluefish, squid or the belly of a gray trout or croaker. When fishing artificials, his go-to list includes Berkley Gulp!, swimming mullets and spinnerbaits.
• Creek-Mouth Wisdom: Target mouths of creeks on the ebb tide and, on the incoming, deeper water over drop-offs and around structure with live baits.

Catching Flounder in Georgia

• Expert: Capt. Tim Cutting
• Region: St. Simons Island to northeast Florida
• Species: Southern flounder

A guide since 1990, Capt. Tim Cutting bags flounder year-round from his 20-foot Scout, but does best from June to late fall. “I’m not that big a believer in tidal influence,” says Cutting. “Flounder like clean, salty water and structure near an inlet. They gravitate to wherever the ocean feeds into marshes, jetties, docks and riprap.” Cutting utilizes his trolling motor frequently to cover water. He prefers a Carolina rig with soft plastics, using a sinker as light as possible above the swivel and a short 6- to 15-inch leader to limit bait movement where the bottom is snaggy.

Georgia Flounder Fishing Tips

• Skip the Shrimp: Flounder seldom pass up live croakers, finger mullet, pinfish or menhaden. Junk fish, such as hardhead cats, tend to get to shrimp in this area before flounder do. Soft plastics, such as Berkley Gulps, do well along with spinnerbaits.
• Fewer Fails with a Kahle: Use a Kahle hook for more dependable hooksets. On live bait, wait five to 15 seconds before a hard hookset.
• Think Clearly: When water runs fast, it can become turbid, so concentrate on areas where the bottom isn’t silty. If you can’t see the bottom of your trolling motor, move.

South Florida Flounder Fishing

• Expert: Capt. Alan Sherman
• Region: South Florida
• Species: Gulf and summer flounder

A Miami Beach head boat skipper for decades, Capt. Alan Sherman, who runs a 24-foot Pathfinder, knows a thing or two about flounder. “We usually come upon flounder while fishing for other species,” says Sherman, adding that the more frequently encountered summer flounder run 4 to 6 pounds but Gulf flounder are smaller. Late fall through winter, in sandy areas, near rocky bottoms, yields the best flatfish catches. Sherman likes moving water.

Florida Flounder Fishing Tips

• Supersize Shrimp: In the colder months of winter, fish shrimp, which tend to run large, or else use pilchards hooked through the nose.
• Fish Finger Channels: Target finger channels. Tie the running line via swivel to a 30-pound monofilament leader with a 1/0 short-shank hook, and go with a ¼- to 1-ounce egg sinker, depending on current strength.
• Feel for the Fall: Bounce red or chartreuse jig heads with Gulp! along the bottom. Strikes usually occur as the lure falls.

Gulf Coast Flounder Fishing

• Expert: Capt. Paul Hajash
• Region: Tarpon Springs to St. Petersburg
• Species: Gulf and southern flounder

Capt. Paul Hajash (pronounced hash), who has been guiding since 1999, fishes a 20-foot Backcountry. “Flounder seem to migrate offshore during winter to spawn in deeper water, and come back when water is between 68 and 78 degrees during spring and fall,” Hajash says. Flounder — especially the bigger doormats — feed more by sight than smell, he adds. “Accordingly, they can see better in clearer water, where they lie hidden until something swims over their heads.”

Gulf Coast Flounder Fishing Tips

• Guide’s Hot Spot: Good areas include the ­mitigation reefs that run from Sound Key south to St. Petersburg. Flounder congregate in sandy areas in 10- to 15-foot depths just off those reefs.
• Soak a Sardine: Live sardines with a 1/0 to 3/0 hook, fished with just enough split shot to get them to the bottom, are hard to beat. Nearly as good are tiger minnows, chubs and small pinfish. Mullet strips or small pinfish on a lead-head jig also work.
• Cast Up-Current: In Clearwater Pass when the tide is moving in or out, cast up-current and let your bait drift slowly or bump it along the bottom. Oyster bars anywhere often hold promise.

Catching Flounder in Louisiana

Guide: Capt. Troy Nash Contact: 337-412-5950, Region: South Louisiana Species: Southern and Gulf flounder

Capt. Troy Nash, who’s guided for more than 30 years, employs a 2023 Pathfinder 2500 Hybrid bay boat. “Our best flounder fishing starts in October and November as they migrate into the Gulf to spawn,” he says. “We fish a lot of artificials, such as ⅛- or ¼-ounce wiggle jigs tipped with shrimp.” Nash prefers spin gear with a 20-pound fluorocarbon leader and, if using bait, a 3/0 Owner hook with a shrimp threaded onto it. He adds a small split shot, then bumps the rig along the bottom of bayous and outflows. “You can catch large numbers of flounder in Vermillion Bay and around Marsh Island in the Russell Sage Wildlife Refuge,” he says.

Top Louisiana Flounder Fishing Tips

• Go to the Gators: Look for alligator trails where they enter and exit the water; these create holes where flounder like to nestle. Other points of water flowing in and out of the marshes are good too.
• Follow Slack Tide: Fish the end of high tide, when water starts to slacken, as long as water clarity is decent, then follow the slack tide to the next spot and on and on.
• Flounder on Fly: Fly patterns take plenty of flounder, particularly small poppers, Seaducers and lavender bendbacks. Put a lead wire on the flies to get them below the surface so flounder feel and see the push of water.

Texas Flounder Fishing Secrets

• Expert: Capt. Mike Losoya
• Region: Galveston
• Species: Southern flounder

Capt. Mike Losoya fishes in the marshes and open bays of Galveston. “Around here, we find a decent amount of flounder year-round, but the best runs occur in the marshes from October to November,” says Losoya. He searches for green water that’s neither stained nor crystal clear. Wind doesn’t seem to affect flounder, but he does look for mixed bottoms, “such as sand and mud together with shells around drop-offs in depths from 2 to 20 feet, with the 5-foot range most productive.”

Top Texas Flounder Fishing Tips

• Better with a Baitcaster: Learn to throw a baitcasting rig to maximize precision with just a touch of your thumb to hit the points and run-offs.
• Texas Choice: Live shrimp, mullet, pinfish and croakers work well for those not adept at casting lures, but you should have good action with Berkley Gulps, MirrOlures and the Texas favorite, Corky lures.
• Cover Ground Looking Down: Use your sonar to look for irregularities in the bottom, such as small holes and rocks. Fish eddies in currents. Cover lots of water because flounder will be scattered in potholes as well as open areas.

South Texas Flounder Fishing

• Expert: Capt. Bill Sheka Jr.
• Region: Laguna Madre and Baffin Bay
• Species: Southern flounder

Few guides can match Capt. Bill Sheka’s prominence as one of the most famous fishing personalities in Texas. Now retired, Sheka plied the waters in a 21-foot bay boat for 35 years. “Fishing is best from October to December, when water temperatures fall below 72 degrees, because that seems to get flounder to stop moving,” says Sheka. “Dropoffs are the big key in shallow grass beds, as are points during a push of current.”

South Texas Flounder Fishing Tips

• Pop a Cork: A live shrimp under a popping cork can work magic if popped hard where grass bottom gives way to a channel.
• Twitch Versus Hop: Don’t hop baits along the bottom — they tend to snag too much in these waters. Instead, work your offering with small twitches.
• Cast Master: Precision casting will result in more catches — a difference of only 5 feet from where a guide says to cast can mean the difference between success and a big zero.

The Different Types of Flounder

Gulf Flounder

Summer Flounder

Southern Flounder

Winter Flounder

The post Top Flounder Fishing Tips appeared first on Sport Fishing Mag.

Thirty miles off Oregon Inlet, North Carolina, trolling down a weed line in a 50-foot sportfish, we ambushed a pack of big dolphin. The fish attacked our spread, leaping out of the water, slashing behind a skipping bait, greyhounding from one side of the spread to the other.

With outrigger pins popping, rods bending over and lines coming tight, mate William Howell called anglers out of the cabin while Capt. Jason Snead put the teal-green Dream Girl into a tight turn.

Once all the rods were heaving with big fish and the reels losing line, Howell instructed the anglers to grab a gimbal belt and a fishing rod. Snead kept the boat idling forward while the anglers worked their fish to the boat.

Big dolphin don’t come easy. The broad green-and-blue fish streaked side to side and leaped into the air, frantic to escape. The anglers labored over their reels while captain and mate orchestrated a line dance with anglers shuffling around the cockpit to stay untangled.

In short order, Howell handlined each mahi close to the boat, gaffing it and swinging it into the fish box. As the anglers shared high-fives and back slaps, Howell deployed the lines and Snead bumped the boat back to trolling speed. Dream Girl lurched and rolled over waves and troughs and all eyes searched the sea to find the next weed line.

The Spring Dolphin Season

This scene played out a few years ago. These days, Howell runs his own boat. I caught up with him in late spring as he prepared for another season of dolphin fishing.

Howell expects bigger fish to show up off Oregon Inlet in April and hang out all summer. From mid-summer to early fall, the bulls move north. Between June and September, anglers from Virginia to New Jersey see their best big-dolphin action.

At least that’s how it’s supposed to go. The last few years, anglers have seen fewer big dolphin in early summer. So, when the sargassum weed lines up and the dolphin are on the feed, anglers need to be ready to make the most of the opportunity.

Finding Mahi

Howell generally hunts dolphin from 20 fathoms to the edge of the continental shelf. But to find big fish, Howell depends on sea-surface-temperature charts. “Water temperature is more important than depth,” he says. He looks for a substantial change in water temperature and color.

Once the boat crosses the change, Howell searches for floating sargassum that serves as a dolphin oasis. According to Howell, ideal conditions include a southwest wind blowing the weed against the edge of the Gulf Stream current.

Farther up the coast, anglers fishing off mid-Atlantic states don’t have the reliable Gulf Stream current found off Hatteras. Instead, they look for less significant changes in water temperature, clarity, altimetry and plankton levels that help amass sargassum and floating flotsam, which hold dolphin.

Once Howell finds the weed line, he slows the boat to 6 knots and puts out four rods. “I keep the spread limited to four rods to reduce tangles and keep the fish focused,” he says.

Big dolphin play like puppies in a dog park. Fewer baits in the water keep the dolphin on target and improve the chances for a good bite. If a dolphin hits a lure and misses, though, pull the ravaged hook out of the water and drop a fresh bait back.

Tackle and Rigging

Rigging a naked, unweighted skipping ballyhoo takes just a few minutes. In this video, the author walks you through the basic procedure.

Howell targets bulls with a quiver of 20-pound trolling rods paired with lever-drag reels spooled with 30-pound monofilament. To the end of the line, he ties a Bimini-to-no-name-knot connection to attach a 24-foot length of 80-pound mono and ties a 250-pound snap swivel to the end. For the leader, he ties a surgeon’s loop at the end of a 5-foot piece of 50-pound monofilament and terminates that with a 7/0, short-shank, thin-wire J-hook. Slip the surgeon’s loop into the snap swivel to complete the rig.

To add the bait, select a small ballyhoo, thaw it in saltwater and remove the eyes. Squeeze the bait and break its back. Take a 12-inch piece of copper rigging wire and thread one inch of it through the hook eye. Wrap that short end around the hook shank, leaving the remaining 11 inches of wire as a long tag end.

Hold the ballyhoo upside down and insert the point of the hook into the base of the gills. Thread the ballyhoo onto the hook as if threading a soft-plastic artificial onto a jig head. The point of the hook exits the belly and the eye of the hook rides beneath the ballyhoo’s eye.

Pass the long tag end of the rigging wire through the ballyhoo’s eye socket two times. Push the tip of the wire up through the base of the ballyhoo’s bill and then wrap the wire around 1/2 inch of the bill. Break off the remainder of the bill. 

Howell rigs some of the ballyhoo with a chin weight so that they slightly submerge, but he prefers to skip unweighted baits along the surface. 

Expert Tips to Troll for Mahi

To deploy his four baits, he uses a mix of short rigger, long rigger and flat line positions. He keeps four more rods rigged and ready to pitch to dolphin in the spread. “I wouldn’t want more than six dolphin on at once,” he laughs, imagining the chaos that would create. 

He lets the baits drop back in the spread until they skip across the water or swim just below the surface without spending more than a few seconds in the water or in the air.

When a school of dolphin attacks, Howell keeps the boat trolling until all rods host fish. If a dolphin strikes short, he picks up the rod and jerks it, then drops the rod tip to make what’s left of the bait shoot across the water and sink back to the fish. If that doesn’t elicit another bite, he instructs the angler to pull in the bait while another angler drops a fresh ballyhoo into the spread.

Once a fish is hooked, he keeps the boat moving slowly ahead while the angler reels. “The key is to keep the fish behind the boat and the lines untangled,” he says.

When the fish is within 20 feet of the boat, Howell sets the 6-foot gaff in reach and lightly takes the line in his hands. Carefully, he guides the fish by holding the line low to the water to keep the fish’s head submerged. If the dolphin gets its head above water, it jumps into the air and most likely throws the hook.

Once the dolphin is gaffable, Howell strokes it in the back just behind the head. Then, in one motion, he lifts the fish out of the water and swings it into the fish box — where it often explodes in a frenzy of tail whipping, rod-breaking energy.

When big dolphin school up behind the boat, or Howell finds a pack of fish on a float, he slows the boat and drops a rigged ballyhoo to the dolphin. He jigs the bait back and forth to get the fish’s attention. When he fires up a feeding frenzy, Howell can catch big dolphin one after another. “Dolphin fishing is one of the coolest things we get to do,” he says. Fast action, aggressive fish and an explosive fight make dolphin a fan favorite. “People love to catch them.”

The post How to Catch Dolphin in the Mid-Atlantic appeared first on Sport Fishing Mag.

The word “artificial” is inherently pejorative. If a food company includes artificial colors or flavors in a particular product, it’ll bury that fact in the list of ingredients. Highlighted on the front of the package will be something like “Packed With Vitamin C,” rather than “Now With More Artificial Flavor.”

That’s true for everything but fishing. Having success with “artificial” lures is viewed as affirmation of skills, and anglers across the fruited plain regularly entreat fisheries managers for more artificial reefs. Louisiana’s Department of Wildlife and Fisheries (LDWF) has responded to that demand in recent decades by dropping limestone, shell and even bridge rubble in select areas across the coast, and since the state provides easy-to-find coordinates on the LDWF site, the reefs are regularly visited by hopeful anglers.

Still, none is as regularly productive as the 15 miles of artificial reefs in eastern Lake Pontchartrain that were designed for transportation and commerce. Attracting fish is just a happy accident.

Louisiana’s Bridge Fishing

Interstate 10, Highway 11 and a train trestle all span a roughly 5-mile gap over Louisiana’s most famous coastal lake. Commuters and engineers see these bridges as a connection between the cities of New Orleans and Slidell, but to anglers, they are just really expensive fish-attractors.

Every year in the spring and fall, speckled trout and flounder join the redfish, sheepshead and black drum that spend all year hiding behind the bridge stanchions to ambush baitfish and shrimp being pushed by tides around the concrete. When the trout arrive, word spreads quickly among the south Louisiana fishing community, and hordes of marauding anglers descend on the bridges.

By far, the train trestle attracts the most attention. Its stanchions are far more tightly packed and are surrounded by scattered rip-rap. This combination attracts more fish than the other two bridges, and consequently, that attracts more anglers. On a calm weekend day in the spring or fall, a latecomer can find it almost impossible to shoehorn within casting distance of the bridge, since most anglers will be soaking live shrimp while on anchor.

As such, trestle diehards prefer to go on weekdays with marginal wind, when they can work stretches of the bridge with artificial lures. The most popular are 3 ¹⁄₂– to 4¹⁄₂-inch paddle tails fished on ³⁄₈– to ¹⁄₂-ounce jigheads. Standard protocol is to set up on the down-current side of the bridge, and cast as close to the stanchions as possible.

How to Fish Bridges

But, as frequently is the case in fishing, sometimes the rules don’t apply, and the fish are located far off the stanchions or on the upcurrent side. Trestle veterans test all possibilities before abandoning the bridge to try their luck at Highway 11, Interstate 10 or the nearby marsh.

Depths across the span of the bridge range from 8 to 16 feet, and contact with the bottom is almost always essential. Most successful anglers hop the lures back to the boat, allowing them to settle back to the bottom after each hop.

Bites are often subtle ticks that test anglers’ skill and the sensitivity of their equipment. That’s true even though the speckled trout that populate the bridges are consistently some of the largest available to Louisiana anglers. Though the trestle seldom delivers fish over 6 pounds, an average speck there is about 2 pounds.

As a general rule, fishing is best in the spring on a rising tide that’s bringing bait in from outside waters and in the autumn on a falling tide that is sucking white shrimp out of the backwaters. But great trips can still be had on opposite tides during the respective seasons. In the spring, the speck run lasts until about the middle of June, when mature fish move to the salty waters of the big bays and sounds to lay eggs and fertilize them. They typically return sometime in October.

Nearby launches are located in Slidell (Eden Isles and Bayou Liberty) and New Orleans (Rigolets, Lake Catherine and Irish Bayou). The eastern shoreline of Lake Pontchartrain provides reasonable protection on a wind with any east in it. Westerly winds are like kryptonite to the lake’s bridges, dirtying the water, shutting down fish and making for a bumpy, miserable experience. Fortunately, predominant winds in the spring and fall are out of the east, and good days at the bridges are far more common than bad ones.

The post Artificial Structure Attracts Spring Specks appeared first on Sport Fishing Mag.

The surf zone is a wild arena. Completely different environments span the Northeast to the Carolinas all the way to Florida. Texas and California are distinct too. But anglers who prowl the beaches know some surf rigs can be ubiquitously applied. Still, the many different options available might confuse those who don’t understand their applications. And surf spots in different states sometimes have different names for the same rigs. As a diehard New Jersey surf caster, I want to help you pick the best rigs for your favorite species. The hi-lo rig, pill float rig, fishfinder rig, chunk rig, and mullet rig are some my favorites for stripers, redfish and pompano, even sharks.

The Hi-Lo Surf Rig

Quick Summary: Why have one hook when you can have two? Joking aside, there’s more to the logic of a hi-lo rig (dropper loop rig) than just having another hook. The hi-lo rig, sometimes spelled high-low rig, is meant to cover the waters just off the sea floor, anywhere bottom fish are feeding. Even one foot can make a difference to get bites when targeting true bottom feeders or to convince wary fish to swim up and eat a bait. Bait with worms, clams, shrimp, crabs or small chunk baits. (You can also use the rig when fishing bridges or piers — just space out the hooks accordingly.)

Design: Use a 75-pound barrel swivel and 30-inch section of leader. Tie the two dropper loops 16 inches apart in the leader. Pick appropriate size hooks scaled to the fish species you’re targeting, then thread the hooks on to the dropper loops. Tie a loop knot to the opposite end of the leader that you tied the swivel. A loop knot allows you to easily attach and remove a weight for different conditions. In the surf, pyramid sinkers work the best to hold bottom.

Species: Surf stripers, snapper, grouper, black sea bass, rockfish, tautog

The Fishfinder Slide Rig

Quick Summary: The fishfinder rig is meant to allow feeding fish to pick up a natural bait without feeling any unnatural resistance. The lack of tension helps prevent a gamefish from spitting out the offering. Try this setup when using live baits such as bunker (menhaden), mullet, eels, pilchards, sandworms or bloodworms. You can also use chunk baits or fresh clams as well. Besides the surf, good spots to use fishfinder rigs include inlets or creeks when the tide is running. Anglers should free-spool the line and allow a fish to take it unhindered in the current for a natural presentation.

Design: Utilize a fishfinder slide with sinker clip to attach a pyramid or bank-style sinker, or you can substitute an egg sinker for the slide clip. I prefer to use a 75-pound barrel swivel to prevent the sliding weight from reaching the hook. To the swivel, tie on 20 to 30 inches of leader and a snelled hook.

Species: Fluke, southern flounder, striped Bass, red drum, cobia, sheepshead

The Pill Float Rig

Quick Summary: Use this rig to keep the baits floating off the bottom to prevent crabs from stealing your baits. Sandfleas, worm bits and clam bits are great natural baits. Artificial offerings such as Fishbites, Fishgum and Gulp Saltwater Surf Bytes work too. Targets are generally smaller fish species up to 4 pounds. Or use the rig to procure live baits such as grunts and pinfish for the livewell. One other spot this rig excels: fun fishing along bridges and piers.

Design: A hi-lo rig design, except with small Styrofoam pill shaped floats in front of the size number 4 to 8 bait-holder hooks.

Species: Pompano, whiting (northern kingfish), white perch, grunts, pinfish

The Chunk Rig

Quick Summary: Tie on the chunk rig when targeting larger gamefish and you want to throw big baits. Use chunk baits such as menhaden, bluefish, cut mullet, pinfish, grunts or herring. A long leader allows bigger fish to pick up the bait and swim off. Then, an angler can and should reel tight for an effective hook-set. This is a great all-around rig when casting from the shoreline targeting different species. Just about everything eats chunk baits, except maybe those few crab-crunchers.

Design: Tie on a three-way swivel, with a sinker clip attached to one eye to handle a pyramid weight. The other eye receives a 30-inch piece of 40- to 80-pound mono leader. A snelled circle hook, scaled accordingly from 5/0 to 12/0, ensures solid hook sets.

Species: Sharks, striped bass, bluefish, drum, snook

The Mullet Rig

Quick Summary: Specifically designed to throw fresh or frozen mullet, this rig allows the whole bait to be fished in a natural manner. The mullet floats just above the sandy seafloor in an enticing display to attract feeding gamefish. Also, the float keeps your bait off bottom where crabs can pick it apart.

Design: For this rig, I use an oval Styrofoam float built-in with a 4-inch length of wire, ending with a dual-barb hook. To bait this rig, remove the hook first. Thread the mullet on the wire from the mouth down through the body out the anal vent. Then, reattach the hook back to the metal leader. Make sure one barb is pierced into the side of the tail. Tie your floating mullet to a length of leader that connects to a three-way swivel. Connect your swivel to the main line. The third leg gets a sinker clip and weight.

Species: Striped Bass, bluefish, red drum, sharks

The post Top Bait Rigs for Surf Fishing appeared first on Sport Fishing Mag.

When anglers think of pursuing saltwater fishing in Alaska, they’re usually inundated with dreams of wrestling a barn-door halibut — which sometimes get so big that anglers might use a .410 to dispatch the large behemoths. But that’s not the only species the cold waters of Northern California all the way to the Gulf of Alaska can provide.

Often thought of as the “younger brother” to targeting halibut in the Pacific Northwest (PNW), the rockfish offers an engaging, high-success-rate option for anglers looking to round out a trip. Also, consider the distressed halibut populations and increased limits anglers have seen in Alaska. If other fish species aren’t available to target, that could really hamper the legendary lodge trips Alaska is so famous for.

From deep-water holes along underwater ridges to the rocky reefs along the coast, rockfish offer a diverse and exciting fishing experience for anglers who target them. We spoke with experts in the field to learn more about the top five species of rockfish you’ll likely encounter in these waters — along with habitat, tackle and techniques for catching them.

Top Rockfish Species to Catch

We caught up with biologists and captains in the region to talk about the top species to catch (there’s more than 34 in Alaska alone). We classified them into two categories — “pelagic” and “non-pelagic.”

Pelagic Rockfish Species

These species tend to dwell off the bottom, congregating around rock pinnacles like walls, ridges, and even in kelp forests near rocky bottoms, but generally higher in the water column. They’re targeted with smaller jigs for the most part, along with spinners and flies on occasion.

Black Rockfish

Agreed upon by all our experts as easily the most-targeted and cooperative rockfish species, these fish school big time around rocky structure (as the name suggests). They are incredibly eager to bite once you find a school. We caught up with Cap. Brent Foster of Brookings Fishing Charters in Oregon. Foster specializes in lingcod and rockfish charters off the Oregon coast, and boasts that 80% of trips are black rockfish, with some really big ones.

“It’s not uncommon to have a 4- or 5-pound black on every trip.” That’s a trophy size fish, and great fun on the light tackle spinning gear. Brent fishes some of the smaller reefs off the lighthouse area of Oregon, often in less than 100 feet of water.

“We do a lot of light tackle here, not running big sticks like other guys do since we’re fishing in 100 feet of water or less with spinning rods and braided line,” Foster said. “Flutter Jigs and smaller paddle tail swimbaits up to 4 ounces excel; sometimes we have to go a bit heavier due to drift.”

Quillback Rockfish

Known for their distinctive spiky dorsal fins, quillbacks are another common pelagic rockfish that grow to good size, making them a favorite among anglers. While available farther north in Alaska, the quillback are a subject of controversy as they’ve been added to the list of banned harvest fish in Oregon. (Other species on the no-take list include copper and China rockfish.) As always, anglers should check limits and regulations of species when fishing in state or federal waters.

What are Non-Pelagic Rockfish?

These rockfish are found most often on or near the bottom and tend to prefer rocky bottoms (hence the name “rockfish”). More often than not, they’re hooked as bycatch when jigging or bait fishing for halibut.

Yelloweye Rockfish

Yelloweye rockfish are the quintessential Alaskan fish. Among the largest of the rockfish species, a big yelloweye jigged up from depth makes a fine photo fit for a postcard. (It’s one of my biggest bucketlist rockfish since moving to the last frontier several years ago.) They’re common and fairly easy to find in and around Kodiak waters all the way down to Prince William Sound.

Tiger Rockfish and China Rockfish

Okay, technically two species, but these are favorites of Capt. Brian McKay of Alaska Outdoors Addiction. While on the smaller side of the rockfish spectrum, they’re beautiful fish, often caught at depths of 100 to 300 feet (and sometimes as deep as 800 to 1,000 feet). They readily hit jigs on light tackle. Tigers are also a favorite of biologist Adam St. Saviour, a researcher with the state of Alaska, as they’re a rare species to catch compared to others. We’ll talk later with St. Saviour about conservation.

Shortraker Rockfish

Gaining notoriety after the 48-pound state record was caught last July in Alaska, shortraker rockfish are known for hanging out deep. Captain Ray Nix, of Crazy Ray’s Adventures, deep-drops herring or octopus on circle hooks with halibut sticks at least 800 feet down to target these fish. By all accounts, it’s quite a chore to crank them up, but worth the experience for a once-in-a-lifetime catch. Electric reels are the preferred tackle method in this scenario.

Fly Fishing for Rockfish

Captain Brian McKay developed a method for clients who want to take rockfish on the fly off the coast of Kodiak Island, Alaska. He suggests switching things up by having one angler “man the jig” with a hookless lure to entice the fish higher in the water column and whip them into a feeding frenzy. Once the fish are jigged up higher, they will cooperate with any big streamers in your fly box, including a super-sized Russian river or popsicle style.

Rockfish Conservation

Catching up with Adam St. Saviour, a research biologist for the Southcentral Region with the Alaska Department of Fish and Game, we’d be remiss if we didn’t cover one major conservation aspect of fishing for rockfish. Rockfish are susceptible to overfishing and bad management practice. They’re also prone to barotrauma during their release, which can kill the fish.

In Alaska, it is imperative for anglers to carry a deep-water release mechanism for rockfish in the boat. These devices are designed to return a rockfish back near the bottom where it was hooked, or to a specified depth, to assist the fish in recompression and up chances of post-release survival. Anglers can find more information about deep-water releases from the organization Return ‘Em Right.

About the Author: Cody McLaughlin is an outdoor writer, conservationist and hunting advocate based in Alaska. He recently launched Trout Stream Studios as an executive producer for podcasts and livestreams in the hunting and veterans’ affairs spaces – including for the Congressional Sportsmen’s Foundation’s The Sportsmen’s Voice Podcast, the popular Blood Origins Podcast, and the Veterans’ Affairs Administration’s National Center for PTSD. He serves currently on the board of the Alaska Outdoor Council and is a former board member and lead spokesman of the New Jersey Outdoor Alliance.

The post Targeting Rockfish in the Pacific Northwest appeared first on Sport Fishing Mag.